edelbrock

These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS carburetors only. Do not use with other brands. Sold in pairs.Installation InstructionsWarranty

These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS carburetors only. Do not use with other brands. Sold in pairs.Installation InstructionsWarranty

These metering rods are designed for use with Edelbrock Performer Series and Thunder Series AVS carburetors only. Do not use with other brands. Sold in pairs.Installation InstructionsWarranty

Edelbrocks high performance hydraulic roller lifters for small-block Chevy, W-series Chevy, big-block Chevy, big-block Chrysler, small-block Ford and FE Ford are the perfect match for street and high performance applications.Installation InstructionsInstallation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 1966-1968 AC Shelby Cobra Base 1975-1976...

Edelbrock red roller rockers are manufactured in the USA from lightweight 7129 grade aluminum. The body is CNC machined then micro polished and anodized for durability. The trunnion race, roller pin and roller tip are centerless ground for superior quality. A high quality Torrington...

Edelbrock Rollin' Thunder Camshaft #2268 is designed for 348/409 (W Series) engines from 1958-65 and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams...

Edelbrock Rollin' Thunder Camshaft #2263 is designed for 500+ Mark IV and Gen V engines from 1967-95 and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are...

Edelbrock Rollin' Thunder Camshaft #2264 is designed for 500+ Gen VI engines from 1996-Later and produce optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams...

Edelbrock Rollin' Thunder Camshaft #2218 is designed for LS1/LS6 Gen III Chevy's from 1997-04 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts match with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth idling cams...

Our push-on style valve cover breathers contain an effective filter which traps oil vapor and prevents engine compartment contamination. Breathers come with rubber grommets and match our chrome and black valve covers.Warranty

Edelbrock #7366 is a Complete Gasket Set for 1961-78 B & RB 361-440 Chrysler V8 Engines. Includes Cylinder Head, Exhaust, Intake, Distributor O-Ring, Water Outlet, and Valve Cover Gaskets. Must use Stock Type Valley Pan not included,.Warranty

Valve Spring Locators and Seat Cups provide a hardened barrier between the springs and the aluminum heads, positively locating the base of the spring to prevent unwanted spring movement. Sold in sets of 16.WarrantyInstallation InstructionsInstallation Instructions

Performer RPM Dual-Quad intake manifolds are designed to fit 1958-1965 Chevrolet 348/409 W big-block engines. Two versions are available, one for small-port cast iron factory heads and one for factory large port or with our Performer RPM W-series heads number 60809 or number 60819....

Based on the powerful Performer RPM Vortec number 7116, this single four-barrel intake is designed for 262-400 c.i.d. Chevy V8s with 1996 and later Vortec (L31) cast iron or the new Edelbrock E-Tec aluminum heads.Installation InstructionsWarrantyInstallation InstructionsInstallation Instructions

Edelbrock Rollin' Thunder Camshaft #2201 is designed for 283-400 V8 Chevy engines from 1957-1986 and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. They are smooth...

Edelbrock Rollin' Thunder Camshaft #2204 is designed for 283-400 Chevy V8 engines from 1987-Later (Non LT1/Gen III) and produces optimum torque from the low-end to the mid-range. Rollin' Thunder camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm....

These gaskets feature Micropore MP-2N an ultra-modern environmentally safe gasket material provides excellent sealing on rough, irregular flange surfaces.Installation InstructionsWarrantyWarrantyThis Part Fits: Year Make Model Submodel 1977,1980 Buick Century Base 1977-1979 Buick Century Custom 1980 Buick Century Estate 1978-1980 Buick Century Limited 1978-1979 Buick...

Edelbrock one-piece hardened steel pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed swedged ends for a high quality fit with the cup seats. A black oxide finish is added for...

Utilizing the proven short runner tunnel-ram style, both of these manifolds provide the next step up in performance for LT1 and LT4 owners. These are both direct stock replacements for OEM equipment with all required emissions features.Installation InstructionsWarrantyInstallation InstructionsThis Part Fits: Year Make Model...

Edelbrock one-piece hardened steel pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface hardened for maximum durability. They have precise formed swedged ends for a high quality fit with the cup seats. A black oxide finish is added for...