-
Vendor: AEMV2 Water/Methanol Nozzle and Controller Kit, HD Diesel Controller - Internal MAP with 40psi max, 200psi WM Pump, Jets, DOES NOT INCLUDE TANKWarranty
- $539.95
$600.00- $539.95
- Unit price
- per
-
Vendor: AEMV2 Water/Methanol HD Controller Kit - Internal MAP with 40psi max, CONTROLLER ONLYWarranty
- $159.95
$178.00- $159.95
- Unit price
- per
-
Vendor: AEMV2 Water/Methanol Multi Input Controller Kit- 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, CONTROLLER ONLYWarranty
- $159.95
$178.00- $159.95
- Unit price
- per
-
Vendor: AEMV2 Water/Methanol Standard Controller Kit - Internal MAP with 35psi max, CONTROLLER ONLYWarranty
- $159.95
$178.00- $159.95
- Unit price
- per
-
Vendor: AEMV2 Water/Methanol Injection 1.15 Gallon Tank Kit with Conductive Fluid Level SensorWarranty
- $121.95
$136.00- $121.95
- Unit price
- per
-
Vendor: AEMV2 Water/Methanol Injection Kit, Standard Controller - Internal MAP with 35psi max, 200psi WM Pump, 1.15 Gallon Reservoir, Conductive Fluid Level SensorWarranty
- $499.95
$556.00- $499.95
- Unit price
- per
-
Vendor: AEMV3 Water/Methanol Injector & Swirl Generator Kit, Includes Machined Injector, T Fitting, Hose, and 3 Swirl Generators for Flow
- $75.95
$84.39- $75.95
- Unit price
- per
-
Vendor: AEMV2 Water/Methanol Nozzle and Controller Kit, Multi Input Controller - 0-5v/MAF Frequency or Voltage/Duty Cycle/Ext MAP, 200psi WM Pump, Conductive Fluid Level Sensor, NO TANK INC.Warranty
- $439.95
$489.00- $439.95
- Unit price
- per
-
Vendor: AEMV2 Water/Methanol Nozzle and Controller Kit, Standard Controller - Internal MAP with 35psi max, 200psi WM Pump, Jets, DOES NOT INLCUDE TANKWarranty
- $439.95
$489.00- $439.95
- Unit price
- per
-
Vendor: AEM2 complete injector assemblies and 2 sets of Swirl Generators for Flow Volumes
- $85.95
$95.50- $85.95
- Unit price
- per
-
Vendor: AEMAEM Water / Methanol Injection 6-Amp Recirculation-Style Pump 200psi for One-Gallon Kit **replacemenWarranty
- $149.95
$167.00- $149.95
- Unit price
- per
-
Vendor: AEMThe AEM Water Injection Kit is a safe and economical way to reduce air inlet temperatures to increase boost pressure for more power. Lower air inlet temperatures allow users to advance timing without having to run higher-octane fuel. This is the most complete kit...
- $34.95
$38.83- $34.95
- Unit price
- per
-
Vendor: AEMWater/Methanol Injection 200psi Recirculation Pump w/ 3/8 -inch NPT FittingsWarranty
- $169.95
$189.00- $169.95
- Unit price
- per
-
Vendor: AEMStainless steel Water/Methanol Injection Solenoid that eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. High flow capability (3,600cc/min) and an low current draw of only 0.75A
- $110.95
$124.00- $110.95
- Unit price
- per
-
Vendor: AEMWiring Harness for V2 Water/Methanol injection Controller with Multi Input FeaturesWarranty
- $29.08
$32.31- $29.08
- Unit price
- per
-
Vendor: AEMX-Series Oil Pressure Gauge 0-150psi - 0-10bar, Black Bezel and Black FaceplateWarranty
- $239.95
$267.00- $239.95
- Unit price
- per
-
Vendor: AEMX-Series GPS Speedometer Gauge with 10Hz GPS, Displays 0-160mph / 0-240kph on Outer LEDs, Unlimted Readings Center Display, Black Bezel and Black FaceplateWarranty
- $159.95
$178.00- $159.95
- Unit price
- per
-
Vendor: AEMX-Series GPS Speedometer Gauge 0-160mph / 0-240kph Accessory Kit. Silver Bezel & White FaceplateWarranty
- $7.01
$7.78- $7.01
- Unit price
- per
-
Vendor: AEMX-Series Volt Gauge 8-18V, Black Bezel and Black FaceplateWarranty
- $149.95
$167.00- $149.95
- Unit price
- per
-
Vendor: AEMX-Series AEMnet Can Bus Gauge, Displays Channels from AEMnet Enabled Devices, Black Bezel and Black FaceplateWarranty
- $174.95
$195.00- $174.95
- Unit price
- per