Edelbrock

Performer RPM Q-JET Marine Intake Manifold For 1987-95 Small-Block Chevrolet 262-400 V8's. All Cooling Water Passages are Lined with Brass to Prevent Corrosion. The Carb Pads Accept Either Q-Jet or Square-Bore Marine Carburetors.Warranty

VICTOR E-TEC EFI (2500-8000 RPM) The 29145 is a Vortec/E-Tec version of our popular Victor E 23° EFI manifold and is intended for EFI applications like our Pro-Flo 3 EFI system. This manifold features a similar deep plenum and tapered cross-sections like the Victor...

Edelbrock part #17002 Victor Series billet aluminum mechanical fuel pump is designed for SBF and is ideal for high performance applications. The 5/8"-18 inlet and outlet come with ?8AN fittings installed to increase flow over fuel pumps.Warranty

Edelbrock fuel pumps and Regulator kits take the guesswork out of selecting the right fuel pump and regulator combination for your application. These kits are made up of our top selling combinations for both carbureted and EFI applications. Fuel Pump and Regulator Kit #17923...

The Pro-Flo XT 289/302 EFI intake manifold has a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range. This manifold produced 20 more horsepower over our number 35210 manifold at 5500 rpm.Warranty

Edelbrock part #2043 Performer RPM Top End Kit is designed for 1981 and earlier Small-Block Ford 331-363 V-8 Engines. This Top End Kit produced 438 HP & 413 TQ on a 347 c.i.d. Small-Block Ford with 9.5:1 compression.Installation InstructionsInstallation InstructionsWarrantyThis Part Fits: Year Make...

CNC-machined from aluminum extrusions, these aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.WarrantyInstallation Instructions

CNC-machined from aluminum extrusions, these aluminum fuel rails have a flow-through design and fittings on both ends where applicable. Designed for Edelbrock EFI manifolds, they come with all necessary hardware.Installation InstructionsInstallation InstructionsWarranty

Chevrolet:Small-Block Gen III LM7:325 (5.3L);Chevrolet:Small-Block Gen III LS1:346 (5.7L);Chevrolet:Small-Block Gen IV LC9:325 (5.3L);Chevrolet:Small-Block Gen IV LH8:325 (5.3L);Chevrolet:Small-Block Gen IV LMF:325 (5.3L);Chevrolet:Small-Block Gen IV LMG:325 (5.3L);Chevrolet:Small-Block Gen IV LY5:325 (5.3L)Installation InstructionsInstallation InstructionsWarrantyThis Part Fits: Year Make Model Submodel 2006-2007 Cadillac CTS V 1998-2002 Chevrolet Camaro...

These elbows are designed for use in high hp race applications. An internal divider optimizes flow distribution to all ports of the manifold by reducing turbulence. High Flow Elbow #3849 is an ultra high flow version which measures 4.50" from flange to throttle body...

These elbows are designed for use in high hp race applications. An internal divider optimizes flow distribution to all ports of the manifold by reducing turbulence. High Flow Elbow number 3849 is an ultra high flow version which measures 4.5in. from flange to throttle...

Edelbrock Performer 400 EGR Intake Manifold for Ford 351/400 Modified Small-Block V8.Installation InstructionsWarranty

Chevrolet:Small-Block Gen III LM7:325 (5.3L);Chevrolet:Small-Block Gen III LS1:346 (5.7L);Chevrolet:Small-Block Gen IV LC9:325 (5.3L);Chevrolet:Small-Block Gen IV LH8:325 (5.3L);Chevrolet:Small-Block Gen IV LMF:325 (5.3L);Chevrolet:Small-Block Gen IV LMG:325 (5.3L);Chevrolet:Small-Block Gen IV LY5:325 (5.3L)Installation InstructionsWarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 1998-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro...

Chevrolet:Small-Block Gen III LM7:325 (5.3L);Chevrolet:Small-Block Gen III LS1:346 (5.7L);Chevrolet:Small-Block Gen IV LC9:325 (5.3L);Chevrolet:Small-Block Gen IV LH8:325 (5.3L);Chevrolet:Small-Block Gen IV LMF:325 (5.3L);Chevrolet:Small-Block Gen IV LMG:325 (5.3L);Chevrolet:Small-Block Gen IV LY5:325 (5.3L)Installation InstructionsWarrantyInstallation InstructionsThis Part Fits: Year Make Model Submodel 1998-2002 Chevrolet Camaro Z28 1998-2002 Chevrolet Camaro...

Edelbrock Pro-Flo 4 EFI System for Chevrolet LS GEN III/IV engines. The EFI system comes with a 4150-Style satin finish Victor Jr. cathedral port intake manifold and 29 Lb/Hr injectors capable of 450 HP with 58 p.s.i. fuel pressure.Warranty

Edelbrocks valve cover breathers contain an effective filter which traps oil vapor and prevents engine compartment contamination. Each breather comes with rubber grommet or mounting hardware. Push in breathers will fit any 1-1/4 diameter valve cover hole. Edelbrock offers these breathers to match most...

This Wide Band Air/Fuel Ratio interface unit will not only work with all current EFI systems, but with any aftermarket EFI system that can accept a 0-5 volt input for monitoring Air Fuel Ratios.Warranty

The Edelbrock #38783 Victor EFI 4-Barrel Throttle Body complements our Victor EFI line of manifolds. This throttle body mounts on a standard 4150-style square-bore carburetor bolt spacing. It is sand cast; fully machined; and assembled by Edelbrock. The #38783 has 1.75in. Throttle Bores and...

These adapters are required to install Edelbrock 5.0L manifolds number 3821/number7126 on 1994-95 Mustangs. They must be used with Edelbrock or stock throttle body. The powder-coating is the same titanium gray used on the Performer 5.0L.WarrantyInstallation InstructionsInstallation Instructions

Based on our 5.0L Mustang throttle bodies, the Victor 70mm and 75mm race throttle bodies can be easily adapted to a wide variety of applications.Installation InstructionsWarranty