aFe

Washable and reusable for multiple cleanings, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Pliable polyurethane flange with integrated bumps insures tight, no leak seal over the life of the filter.

The silicone coupler is designed to connect to a 3" tube and is 2" long. The silicone construction is designed to meet modern elevated engine compartment temperatures with a 3-ply silicone reinforced configuration.

100% Polyurethane Construction: To allow multiple cleaning cycles, the top and base are made of 100% pliable polyurethane that does not deteriorate with time or exposure to heat and chemicals.This Part Fits: Year Make Model Submodel 2015-2020 Ford Mustang Shelby GT350 2015-2020 Ford Mustang...

With five layers of progressively finer mesh cotton gauze media and two layers of synthetic media and a 100% polyurethane top and base, this high flow "oiled" conical performance filter provides excellent airflow for maximum horsepower and torque. Washable and reusable for multiple cleanings,...

With seven layers of progressively finer mesh cotton gauze/synthetic media between 100-percent polyurethane top and base, this high flow "oiled" conical performance filter provide maximum protection with highest cumulative filtration efficiency for severe duty environments. Washable and reusable for multiple cleanings, the tall open...

Dual Large 3-Layer "Oil-Free" Performance Air Filters: This intake system utilizes oil-free, large 7" tall radial flow performance air filters with 3-Layer synthetic media for maximum convenience. Top Mounted Heat Shield Design: aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume...

This cold air intake system resulted in 14 horsepower, 20 lbs. x ft. torque max gain and outflowed the factory intake by 21% on the 2012-2014 Chevrolet Camaro V6-3.6L. Included in this cold air intake system, is a 18 gauge powder-coated heat shield and...

This cold air intake system resulted in 14 horsepower, 20 lbs. x ft. torque max gain and outflowed the factory intake by 21% on the 2010-2011 Chevrolet Camaro V6-3.6L. Included in this cold air intake system, is a 18 gauge powder-coated heat shield and...

This cold air intake system resulted in 14 horsepower, 20 lbs. x ft. torque max gain and outflowed the factory intake by 21% on the 2012-2014 Chevrolet Camaro V6-3.6L. Included in this cold air intake system, is a 18 gauge powder-coated heat shield and...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume...

This coupling features a 30° angle and is designed to connect to tubes with a 3-1/2” diameter. It’s commonly used on aFe POWER cold air intake systems, but can be used for a variety of projects. Its silicone construction features a layer of polyester...

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume...

6" Flange Massive Air Filter: This intake system utilizes a pre-oiled, 7" tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Dyno-Tuned Carbon Fiber Intake Tube: Lightweight, high gloss,...

The high temperature 2-PLY reinforced silicone 40 degree reducer coupler is designed to connect to a (4" x 3-1/2") OD tube and is 3" long. The coupling is 3" long with a 40 degree bend. Standard stainless steel worm-gear #056 and #064 clamps provides...

For those of you who have an aFe Power Stage-2 intake system for the 2011-2014 Ford Edge V6-3.5L, aFe Power now offers an intake cover to help reduce air intake noise. This cover is constructed of vacuum formed ABS plastic material that snaps right...

Soft Part Replacement Packages for existing air intake systems 51-82722 & 54-82722This Part Fits: Year Make Model Submodel 2005-2015 Toyota Tacoma Base 2005-2015 Toyota Tacoma Pre Runner

Soft Part Replacement Packages for existing air intake systems 51-82342 & 54-82342This Part Fits: Year Make Model Submodel 2012-2014 Toyota Tacoma Base 2012-2014 Toyota Tacoma Pre Runner 2012-2013 Toyota Tacoma X-Runner