Select Your Vehicle

Choose a Year for your vehicle

Shop By Brand

The following brands are available based on your search

Part Name
Category
Year
Make
Model
Brand
Engine
Submodel
Body
Transmission
Position

Fuel Injection Throttle Body

Showing 1 – 10 products of 366 products

Sort By Popularity Price - Low to High Price - High to Low
keyboard_arrow_down
Apply Specific Filter
Cardone

Reman. A-1 CARDONE Throttle Body - 2008 Saturn Vue Fuel Injection Throttle Body 6 Cyl 3.5L Cardone

In Stock
Part # P311-1CA0EC6
Manu # 67-3002
Brand: Cardone
Condition: Remanufactured
12577029 , 12609500
$96.64
Core Price: $20.70

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle Block Engine CID CC
2008 - Saturn Vue V 6 Cyl 3.5L 213 3490
$96.64
Core Price: $20.70
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2004 Isuzu NPR-HD Fuel Injection Throttle Body 8 Cyl 6.0L Cardone

In Stock
Part # P311-45AC878
Manu # 67-3000
Brand: Cardone
Condition: Remanufactured
12570800
$111.97
Core Price: $27.90

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle Block Engine CID CC
2004 - Isuzu NPR-HD V 8 Cyl 6.0L 364 5967
$111.97
Core Price: $27.90
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2003 GMC Yukon XL 2500 Fuel Injection Throttle Body 8 Cyl 8.1L Cardone

In Stock
Part # P311-0104CDA
Manu # 67-3001
Brand: Cardone
Condition: Remanufactured
12570801
$111.24
Core Price: $17.10

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle Block Engine CID CC
2003 - GMC Yukon XL 2500 V 8 Cyl 8.1L 496 -
$111.24
Core Price: $17.10
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2000 Ford Focus Fuel Injection Throttle Body 4 Cyl 2.0L Cardone

In Stock
Part # P311-1601067
Manu # 67-1003
Brand: Cardone
Condition: Remanufactured
1M5Z9E926CA , 2M5Z9E926BB , 2M5Z9E926AA , 2M5Z9E926BA
$155.76
Core Price: $27.90

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

with ID #s 2M5U 9E926 AA, BA or BB

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Black/unfinished
  • Product Condition: Remanufactured
  • Throttle Body Actuation Type: Mechanical
Fitment: Vehicle Transmission Cylinder Head Type Block Engine CID CC
2000 - Ford Focus Automatic DOHC L 4 Cyl 2.0L 121 1989
$155.76
Core Price: $27.90
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2004 Nissan Quest Fuel Injection Throttle Body Cardone

In Stock
Part # P311-4E66D87
Manu # 67-0001
Brand: Cardone
Condition: Remanufactured
161198J103 , RME7004CR , RME7004DR
$101.24
Core Price: $13.50

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle
2004 - Nissan Quest
$101.24
Core Price: $13.50
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2005 Infiniti Q45 Fuel Injection Throttle Body 8 Cyl 4.5L Cardone

In Stock
Part # P311-3B586AA
Manu # 67-0006
Brand: Cardone
Condition: Remanufactured
16119AR003 , 16119AR00A
$110.50
Core Price: $20.70

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle Block Engine CID CC
2005 - Infiniti Q45 V 8 Cyl 4.5L - 4494
$110.50
Core Price: $20.70
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2002 Nissan X-Trail Fuel Injection Throttle Body Cardone

In Stock
Part # P311-55C8E88
Manu # 67-0002
Brand: Cardone
Condition: Remanufactured
RM6006DR , 16119AE01B , RME6006CR , 1611KAK01BRE , RME6006 , 16119AE01C , RME6060ER , 16119AE013 , 16119AE01A
$106.50
Core Price: $20.70

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle Region
2002 - Nissan X-Trail Mexico
$106.50
Core Price: $20.70
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2002 Nissan Pathfinder Fuel Injection Throttle Body Cardone

In Stock
Part # P311-5268BEE
Manu # 67-0004
Brand: Cardone
Condition: Remanufactured
16119AL603 , RME7002CR , 16119AL60A , RME7002DR
$97.88
Core Price: $17.10

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle
2002 - Nissan Pathfinder
$97.88
Core Price: $17.10
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 2003 Nissan Sentra Fuel Injection Throttle Body 4 Cyl 1.8L Cardone

In Stock
Part # P311-0470F3D
Manu # 67-0005
Brand: Cardone
Condition: Remanufactured
RME5001DR , 16119AU003 , RME5001ER , 16119AU00A , RME5001CR
$98.25
Core Price: $20.70

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
Fitment: Vehicle Block Engine CID CC
2003 - Nissan Sentra L 4 Cyl 1.8L - 1769
$98.25
Core Price: $20.70
Add to Cart
Cardone

Reman. A-1 CARDONE Throttle Body - 1999 Volkswagen Jetta Fuel Injection Throttle Body 4 Cyl 2.0L Cardone

In Stock
Part # P311-11419AB
Manu # 67-4001
Brand: Cardone
Condition: Remanufactured
06A133066E
$85.92
Core Price: $27.90

Reman. A-1 CARDONE Throttle Body

Remanufactured Throttle Body

Product Attributes:
  • FAQs:
    • A Relearn Calibration Procedure Is Necessary After Installation Of Replacement Throttle Body.
    • Can I Purchase A Throttle Body With A Bigger Bore To Increase Horsepower And Improve My Throttle Response?
    • Do All Throttle Bodies Have An Ice Breaker Mode For Extreme Cold Starts?
    • Do You Sell Throttle Body Spacers?
    • How Do You Clean?
    • How Do You Test?
    • Is It Ok To Bypass The Coolant Hoses?
    • Is There Anything That Has To Be Done After Installing The Replacement Throttle Body?
    • No; Bypassing Of Coolant Hoses Is Not Recommended. There Are Cases Where We Sell Units Without Coolant Pipes, Because We Are Following Oe Supersessions Where The Pipes Have Been Removed And Instructions Are Provided For Rerouting Coolant Hoses.
    • Not All Throttle Bodies Have This Feature Where The Throttle Valve Is Reversed From Its Normal Movement By The Controlling Module To Break Up Any Ice Formation Between The Throttle Bore And Valve. This Feature Is Based On Application.
    • Position Sensors Are Tested To Match Oe Characteristics Throughout Entire Range And Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • Swapping Your Throttle Body For One With A Bigger Bore Is Not Recommended. The Throttle Bodies We Sell Are Specific To The Application.
    • The Electronic Throttle Body Is A Powertrain Component That Has A Plate, Motor, And Integrated Position Sensors Which Are Utilized To Regulate The Amount Of Air Entering The Engine By Opening The Throttle Valve To A Desired Angle Via Commands From The Veh
    • The Most Common Failure In An Electronic Throttle Body Is The Integrated Throttle Position Sensor. The Etb Is Equipped With High And Low Voltage Reference Throttle Position Sensor For Redundancy. Either One Of These Sensors Could Fail Or Possibly Both.
    • The Oe Throttle Body Has Coolant Hoses Attached.  What’s The Purpose?
    • The Purpose Of The Attached Coolant Hoses Is To Keep The Throttle Body Warm By The Transfer Of Heat From The Coolant To The Housing Preventing Moisture From Freezing Between The Throttle Body Bore And Throttle Valve During Extreme Cold Temperatures.
    • The Throttle Body Is Also Utilized As Part Of The Cruise Control, Traction Control, Stability Control, And Pre-crash Systems, As Well As Other Systems That Require Engine Torque Management.
    • We Do Not Sell Throttle Body Spacers Nor Do We Recommend The Use Of A Spacer.
    • We Inspect And Replace All Damaged And Worn Components, Including Sensors, Gears, Connectors, Seals, As Well As Certain Components 100% Of The Time Based On Durability And Function.
    • We Use An Ultrasonic Cleaning System With A Rust-inhibiting Detergent To Clean The Plate And Bore.  For The Exterior We Use A Glass Bead Blasting Process.  We Also Go Through Further Disassembly For Cleaning Of Internal Components.
    • What Causes The Electronic Throttle Body To Fail?
    • What Do You Replace?
    • What Else Does The Throttle Body Control Other Than Idle Air Bypass And Acceleration Throughout Driving Range?
    • What Happens When An Electronic Throttle Body Fails?
    • What’s An Electronic Throttle Body?
    • When An Electronic Throttle Body Fails, The Controlling Module Will Illuminate The Mil/ses/cel, The Module Will Then Activate A Fail-safe Mode Operation And Gradually Reduce The Engine’s Speed Back To An Idle Rpm.
  • Features and Benefits:
    • A Specialized Component Cleaning Process Prevents The Throttle Bore Surface From Being Deformed, Ensuring Optimum Airflow.
    • Each Unit Is Disassembled And Meticulously Inspected. Each Component Is Inspected, Remanufactured Or Replaced Resulting In Reliable And Consistent Performance.
    • Each Unit Is Guaranteed To Fit And Function Like The Original — At A Fraction Of The Typical Market Price.
    • Final Assemblies Are Tested For All Critical Functions, Including Response Time And Airflow At Multiple Points.
    • The High And Low Integrated Throttle Position Sensors Are Tested To Match Oe Characteristics Throughout The Entire Operational Range.
  • Housing Color/Finish: Gray/unfinished
  • Product Condition: Remanufactured
  • Throttle Body Actuation Type: Electro-mechanical
Fitment: Vehicle Engine Designation Block Engine CID CC
1999 - Volkswagen Jetta AEG L 4 Cyl 2.0L 121 1984
$85.92
Core Price: $27.90
Add to Cart
Load More

Showing 1 – 10 products of 366 products